MultiStream Single Channel Impellor Pump

Adjustable single channel impellor

Connection in PN6/PN10

Safe to dry run

Controllable Oil Chamber

Plug type cable connection

SiC mechanical seal independent of rotation

Moisture sealed cable inlet

Built-in motor protection

home > waste water treatment products > pumps > sewage pumps > channel pump

Single Channel Impellor Pump (Multistream)

MultiStream pumps are suitable for handling effluent or sewage in municipal and industrial pumping stations as well as in surface water drainage applications & rainwater reservoirs. The adjustable axial gap of Multistream pumps means that if abrasion has taken place the single screw can be easily readjusted to ensure optimal efficiency when the pumps are being serviced. The smaller pumps in the Multistream range have also been used very successfully as portable units in emergency flooding situations.

Multistream pumps can be supplied in both explosion proof (UFK) and non-explosion proof (UAK) versions and are highly efficient.

Recommended for:

effluent which contains fibrous matter & solids
mixed (combined) wastewater
raw effluent
raw sludge
rainwater

Performance Table & Indicative Uses of Multistream Pumps:

Normal Use	Discharge Branch	Free Passage	Rpm	H_max	Q_max
Drainage/Flooding & civil emergency	DN 65	40mm	2800rpm	27m	70m³/h
Communal/Industrial Pumping Stations with high delivery heads	DN 80 / 100	70mm	2800rpm	64m	280m³/h
Communal/Industrial Pump Stations & in rainwater reservoirs	DN 80 / 100	70mm	1400rpm	22m	190m³/h
Communal/Industrial Pump Stations with high flow rates & in rainwater reservoirs	DN 100 / DN 150	100mm	1400rpm	39m	520m³/h
Communal/Industrial Pump Stations with high flow rates & in rainwater reservoirs	DN 200	100mm	1400rpm	35m	540m³/h

Link

Single Channel/Vortex Impellor Pump Data Sheet